While skimming the stock to remove the varnish one thin area gave way in the pistol grip. This proved quite difficult to fill as there was no support to speak of underneath.
Eventually, I managed to fit a piece of shaped wood into the space and affix it with wood glue. To re-enforce it I filled the space with resin. Once sanded and varnished it should disappear fairly quickly.
I could then varnish the wood all over to seal it.
I then oil blacked the remaining parts. I’ll be putting together a video on this process very soon.
The oil blacked receiver in place. You can see the small, irritating gap between the top heat guard and the stock. I have managed to fix it by shaving some of it off in just the right place and adding a brace inside.
Looking quite close to finished now! I’m tweaking a couple of bits to make it a little more usable and will be testing it soon. I also have to finish the scope mount for this client.
This project has sparked a lot of interest so this model will be available as a kit. If this post has inspired you to want a gun of your own, do drop us a line on email@example.com to discuss or find us on Facebook.