Many of VA’s followers are also on the UK WW2 Airsoft forum and will know regular contributor Ken by his handle ‘Kendo’. Ken was one of the first people to buy one of my ready-designed kits and has been using it heavily for well over a year now. I caught up with him recently to get some feedback:
“I was first made aware of Vintage Airsoft’s MkV Sten kit through the WW2 Airsoft forums, perhaps better known to some as ‘Comrades in Arms’. Dom had posted his prototype MkV build, and was looking to put together some more kits for those of us stuck with the perhaps not-entirely-accurate MkII Sten, especially for the many folks like me that portray the iconic late-war British paratroopers!
The idea was inspired: a hand-built, wooden stock, comprising a mounting bracket and pistol grip, that slotted directly onto the receiver of the AGM Sten, replacing the standard T-stock; the kit would be complete with a wooden foregrip that bolted to the Sten barrel shroud, and topped off with a metal front sight that slipped over the outer barrel. As if that wasn’t enough, the wooden stock was hollowed out and wired, meaning the Sten was no longer bound to tiny batteries. All of that for a fraction of the price of a full custom gun, and you could swap back to the old MkII components without any permanent modifications.
I jumped at the chance, and I’m pleased to say after a solid year of near constant use in all weather, the kit has held up admirably. It’s been dropped, fell on, submerged in nasty bog water, and survived me crashing through foliage in full combat kit, with the only appreciable outcome being a slight looseness at the stock mounting (which was subsequently fixed with the liberal application of B&Q’s finest super glue). I’ve found it to be a very comfortable weapon to hold – a far cry from the plumber’s nightmare that was the MkII – and the battery compartment in the stock is truly a godsend; battery switches can be done in a flicker of the time, and without dismantling the gun to boot.
Now, being a drop-in kit, as it were, all of the pieces are obviously made to be easily installed or removed without modifications to the base gun, and there are some drawbacks to this. The front sight, for example, was initially held on by friction, meaning that knocks and bumps to the gun would frequently misalign it with the rear sight. I also found that the paintwork of the metal band that fits around the barrel shroud would wear away very easily, due to the steel fitting of the sling rubbing against it with use. The nature of the kit also means that certain aspects of the real MkV cannot be replicated – the rear pistol grip sits further back, most tellingly, although this is a small price to pay in my opinion.
The front sight issue can be easily solved: boring and tapping a small hole through the underside, then using a pointed screw to tighten it against the outer barrel of the Sten would help immensely. Indeed, the user could go one step further and drill a shallow hole into the outer barrel itself for the tip of the screw, which would eliminate the front sight shifting altogether, and with minimal modification to the base gun.
The barrel band, meanwhile, I would most certainly improve by chemical or oil blacking, rather than painting. This will allow it to resist the worst of the wearing the sling attachment subjects it to, and means I won’t have to keep repainting the bloody thing!
I have been let down by certain individuals in this line of work in the past – sometimes criminally so. I am very pleased to report that my experience with both individual and product in this case has been overwhelmingly positive. It’s safe to say I have put the MkV kit through its paces from day one, and it has rarely let me down, with Dom always on hand with troubleshooting should I need it.
Truly though, in a hobby dominated by yet more M4 derivatives and Multicam FAST helmets, nothing beats attacking an objective in full British airborne kit with a proper MkV Sten in your hands. I have Vintage Airsoft to thank for that that one.”
I have reproduced Kendo’s full review here, unedited for full disclosure! Feedback like this is really appreciated and we’ll be improving our product accordingly by oil blacking the foregrip band and tapping the foresight mounting. This sort of feedback can only be gained after the sort of heavy use Kendo has subjected it to!
A big thanks to Syfer Airsoft Photography for use of their fantastic photographs. Check out their page for great kit and action photos.