PZB 39: Build 3

Anti-Tank, Custom builds, PZB-39 Rifle, WWII

The basic components for this build are all in place, now it is time to add in the parts that pull it all together.

Next up was to fit the buttplate, the top half of this is fixed in place but the bottom folds in to help the rifle pack up smaller for transport. 20161129_141747

In the folded position. Once the cushioned pads are in place it won’t fold quite as far as this but it allows it to fold a lot closer than it would otherwise.

20161129_141757

I have now planed the stock down to its rough shape, adding the grooves with the router. If I was doing this again, I would definitely make these grooves sooner as achieving a straight and level cut on this shape is quite tricky!

20161129_141734

The forestock needs another mounting point further back to really solidly hold it in place, I expect I will have to make some kind of band that slips around the action as the bottom of the tubes at the chamber end are all cut open to hold the airsoft parts. It may make sense to combine this with the rear sight, which is still yet to be mounted.

20161129_141659

The rear sight fitted in position. This is welded into place on the front. I decided not to use this at the attachment point, instead adding a second screw well behind the first one.

20161202_172644

Taking the buttstock home, there are a couple of bits of fabric work for this build. Firstly, the leather cheek rest, presumably added to keep the cheek away from cold metal. It certainly doesn’t provide any great cheek weld.

The second part is the cushioned buttpad, to absorb the not insignificant recoil on the original!

20161206_000559

The leather cheek rest is laced on so it can be removed easily. The originals were sewn on but this looks the part and makes it easier to remove and maintain.

20161205_162729

I have to make the carry handle covers, fit the foresight and re-assemble to paint it, but that’s the majority of work to come.

_dsf8423

In the meantime, the trigger unit cover and pistol grip. I already welded the grip together, at this stage I used a bolt to line up the hinge points and the grip over the cover plate. This can be tacked down so the whole unit swivels as one.

_dsf8424

In place. The receiver was slightly out of square, so I used a clamp to hold it in place while I made adjustments.

_dsf8426

Although the pivoting grip unit doesn’t cycle the action like the original, it will be useful for disassembly.

_dsf8472

It opens much like the original.

_dsf8473

_dsf8474

At the front, I now have a cover plate for the magazine well, which can be swivelled aside to access the magazines and change them.

_dsf8428

 

If you are interested in this project or have an idea of your own, drop us a line on enquiries.vintageairsoft@gmail.com to discuss. ‘Like’ our Facebook page or follow the blog to get regular updates on projects and interesting videos and articles. 

Don’t forget you can buy our complete products via Etsy.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s