The Webley review

Customer Reviews, Imperial Era, pistol, Weapons, webley, WWI, WWII

I thought it was about time that I took a look at the new Well Webley. Having owned a Wingun for some time and having seen the incredibly low price point of the Well I had to see what it was like.

_dsf8560

First impressions:

Side by side, these two guns look very similar in shape. It’s clear that the Well is a plain clone of the Wingun, differing in a few small details, other than the obvious differing finish. Although the Wingun is available in a black finish, I’ve never had one to compare to this.

_dsf8563

The Well finish is thick, when you first get it it needs breaking in a bit to make the action smooth both in the hammer, trigger and break-action.

The Well lacks the detail of trademarks, but in use these are not things you will realistically notice. It does however have some seamlines which would need filing off for the optimal aesthetics.

Weight-wise they are very similar, with similar heft and balance. On the scales, there is only 10g between them. It is quite clear that the Well is a direct clone on the basis of this. Aside from the finish and trades, the only clear identifier of the Well is the screw that controls the cylinder lock. This is a Phillips head rather than a flat head. I have no idea why they chose to do this as they use flat head screws elsewhere.

 

The shells appear to be interchangeable (however see below for more detail on this), I can drop Wingun and Well shells into each revolver with both cycling absolutely fine. The Wingun shells are better fitted and finished, with the heads of the Well shells being a little more rough and a little softer. The Wingun shells also have ‘Webley .455’ written on the back, which may seem to make them more authentic at first glance, this is disregarding the diameter of the shells being .38.

_dsf8512 _dsf8511

In terms of feel, both are pretty much identical. The Wingun is perhaps a little smoother, but to be fair it has seen heavy use ever since I bought it, meaning any rough edges have long since worn off. The break action is slightly easier on the Wingun, which isn’t necessarily a good thing. I have had this revolver open on me in the field: resulting in either spilt shells or a delay while I close it in order to fire. The Well appears to have a little nodule on the action lock which gives a slightly more positive lock-up.

The Well, on first opening the revolver, had a very loose fitting cylinder. The cylinder lock does not work like the original (which is very well replicated on the Wingun), but appears to be entirely reliant on the two screws that hold the locking piece itself. These were initially far too loose, meaning that the locking piece did not grip the cylinder. On tightening, the cylinder no longer fell out, however it became unreliable to cycle in double action. Loosening the cylinder lock slightly allowed the cylinder to remain locked in place and cycle fairly reliably.

The auto eject works well on both guns. The Well is perhaps a little heavier, but again this could be due to wear on the older Wingun. The barrels, on all airsoft revolvers I have experience of, move forwards and backwards with an attachment that interfaces with the cylinder to provide a seal and reduce gas loss. On the Wingun, this is aluminium. On the Well it is some kind of rubber. I’m yet to see if it actually makes any difference in wear over time but it does seem to make single action use slightly heavier for the Well. Not so much that you would notice in anything other than a precision shooting environment, which these replicas are really not designed for.

On the note of precision, the Well has a feature the Wingun is seriously lacking. The Well comes with a fixed hop pre-installed in the barrel. Although it is not a majorly difficult feat to install a fixed hop using either the o-ring method or a flat hop, it is nice to be saved a job, especially given it would not have been a difficult thing for the original manufacturers to do.

Testing

Conditions of testing:

Chronoing and accuracy testing will be with .25g BBs. The Wingun is not in stock configuration, it has had an o-ring hop added. The temperature outside hovered around 1 degree Centigrade. It was probably colder in the workshop.

 

Time for the fun bit. Firstly, I loaded a new CO2 cartridge into each gun, fired off 12 shots from each to take the edge off (good practice when you are shooting at people!) and loaded the shells. I started with the manufacturer provided shells, then shot some of the Vintage Airsoft single and shot shells

The results were… interesting and somewhat unexpected. To the point where I will probably retest at a later date. It was VERY cold in the workshop which will account for some of the results but not the inconsistency.

screen-shot-2017-01-22-at-16-42-42

After firing off a couple of batches of shells it felt like the Well was low on power, so I put it aside to run the same tests on the Wingun. When I finished two Wingun tests, I picked the Well up to continue testing and it was back up to strength. Interestingly it seems like the Well suffered from cooldown much more than the Wingun, which considering their build is near-identical is surprising.

Accuracy:


Accuracy tested at 5m, obviously you will generally be further than this. I may come back and do further testing on this at a later date.

On these Huns head targets, the bull is 30mm, the second ring is 70mm.

The Well:

well

The Wingun:

wingun

In this test, the Wingun produced a significantly smaller group. In fact the first Well group was largely not on the paper. Further testing is definitely required.

Notes on use:

The extractor of the Wingun is a a bit more positive. The Well sometimes fits the shells and sometimes does not. It seems random as to when it does or does not, I presume this is due to cylinder movement as described in the first part of this review.
It is hard to see the spacing issue with the VA shells due to their being white, in the picture below you can see that the rims sit proud of the cylinder. It’s no more than a millimetre but it prevents rotation and even lockup.

_dsf8539

How it should look:

_dsf8542

Also, when loading the CO2, the Well grip panel did not click back into place easily. I had to bend the spring clip a few times to try and get the correct angle for it to fit into the lock and hold the grip in place properly.

Another issue I had with the Well was that it did not always cycle reliably, the hand would push the cylinder but not push it all the way around somehow.

 

After using the Well for a bit, this happened:

_dsf8545

The extractor snapped. Hence having to come back later.

Summary

In summary… if these revolver were the same price, from my experience of these two samples, I would say the Wingun edges it. It is more consistently reliable and hasn’t broken in my extensive use of it whereas the Well example I have broke in the testing phase.

The Well does have a more positive lockup, which is nice. Also the ready-fitted hop is a good thing, though when firing the shot shells it appeared to have very similarly tight groupings to the Wingun with its o-ring hop.

So the difficult bit is that they are not the same price point. The Well is, at the time of writing, 1/3rd of the price of the Wingun (on a good day). It is hard to say that you should spend so much more even when out of the box reliability is such an issue.

 

I am sure that the Well could be made reliable, but it will require time and effort. The Wingun is a pick up and play gun with minimal maintenance required to keep it going.

 

If this content interests you, subscribe to the blog or join us on Facebook. Don’t forget you can buy some of our ready-made products on Etsy, including our own Webley shells.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s