Sten suppressor model for Sten MkIIs or MkVs

Add-on kits, Products, Sten, Sub Machine-guns, Suppressed, WWII

A chap on the British WWII airsoft forum asked if anyone had made a suppressor for their Sten, so I obliged to do a post on my prototype silencer!

As with all my Sten kits (released and in development), I wanted to make this a temporary attachment that could be removed when not wanted.

So, how did I make this?

One piece of 40mm OD (Outside Diameter) mild steel pipe makes up the body of the suppressor, nothing fancy about this at all! Inside this prototype there are two square pieces of plywood with holes through the centre.

These slide over the outer barrel of the Sten and fit very snugly indeed. This makes for a very solid silencer as it has all of the strength of the inner barrel to support it.

20141120_215507

The end cap is a piece of ash, cut to rough shape. I heated a spare section of 40mm tube and used it to cauterise the rough cut cap into shape. Now I have the lathe of course I’d just turn it on that! A little epoxy will secure it in place.

_DSF5042

As the weight of the suppressor is taken by the outer barrel, all that is needed to keep it in place is a retaining screw. I used the screw hole that the heat guard uses on the standard ASG Sten.

_DSF5040

A small piece of brass flat bar bridges the gap, obviously this could also be steel.

_DSF5044

Once the canvas heat cover is on, it camouflages this admittedly unsightly joint!

_DSF5045

On this prototype I’ve just stitched the buttonholes roughly, I’ll be putting in some brass eyelets when I have bought a punching kit!

One thing to bear in mind with this conversion, it is aesthetic ONLY. In no way will this quieten your AEG down as most of the sound is created in the motor and doesn’t really travel down the barrel.

The finish is a combination of enamel paint and matte lacquer so that the metal and wood parts match up.

20141125_220841 copy

The production version of this will differ in a few ways:

1. The end cap will be entirely turned on a lathe for shaping

2. The barrel supports will either be plastic or turned round so that they fill the entirety of the barrel

3. The heat shield will have brass eyelets instead of sewn ones

Production versions will be around £50, a post will be forthcoming on completion of the first model! If you fancy a version of this, do drop us a line on: enquiries.vintageairsoft@gmail.com!

Introducing the Sten MkV

Add-on kits, Products, Sten, Sub Machine-guns, WWII

I am pleased to present the Sten MkV conversion kit, designed to be used on the ASG/AGM Sten MKII. Shown in this video is the prototype, the production version will feature some minor variations.

This kit allows the user to have a Sten MkV when it suits them, while allowing for them to swap back to the more widespread MKII for games where this kit would not be suitable (such as certain WWII games). Bearing this in mind, this kit allows for use of the same type of stick batteries used in the T-stocks that come as standard, meaning that there is no need to buy an entirely new battery setup in order to run the LiPos that most purpose-made MkVs require. The battery compartment is also easily accessible from the rear unlike on most airsoft Stens, allowing for a quick and simple battery change in the field.

Metal parts of this are steel, except for the fore-grip band, which is copper. Metal finishes are a mixture of black enamel/metal lacquer and oil blacking. This guarantees a finish that closely resembles the standard finish on the rest of the Sten where the surfaces are next to one-another. Oil blacking is used on surfaces that are subject to high tolerances and high levels of contact, such as the buttplate which would otherwise be rubbed shiny in no time at all.

OLYMPUS DIGITAL CAMERA

Price as of December 2014 is £120.

Kits are made to order, so there will be a slight delay between order and dispatch, which you will be advised of upon ordering. If you have any specific requests/alternative finishes please do let us know. All products are Made in England.

For orders and questions:

enquiries.vintageairsoft@gmail.com