Webley MkVI Snubnose revolver

Complete builds, Custom builds, Inter-War (1918-1939), pistol, Weapons, webley, WWI

As this build was a pretty quick one I didn’t take many pictures. It all started with a spare Webley revolver that wasn’t perfect (being the Well model) but I wanted to do something interesting with. So, I marked  a line on the barrel and…

25397539_10213410107159897_76443719_o

Chopped it off. Now, there was a bit more to the job than that.

I had to make a new foresight, held in place by two screws. There is a new muzzle, which supports the inner barrel and keeps the barrel return spring in place. The inner barrel had to be shortened and recrowned on the lathe, as well as having the barrel return spring guide cut into it.

25353547_10213410106039869_1800521981_o

The eagle eyed will also spot that the rear sight/locking bridge has been shortened to make it easier to draw from a concealed holster. Due to the paint finish being damaged in the process of chopping the barrel off, I decided to take it all off. It looks good in silver.

_DSC7559

But it looks better blacked. This is my first attempt with Birchwood Casey’s Aluminium black. It’s pretty good, better than I expected for sure. It was improved massively by a thin coat of silicone oil rubbed into the surface with a dry cloth, bringing it up to a dull shine rather than just a drab finish.

_DSC7569

As you can see, there are a few spots around the muzzle where it hasn’t reacted properly for some reason, but I can touch it up later if I feel the need. To be honest I think it helps give it a bit of a worn look, a snubnose shouldn’t look pristine, they’re a working gun.

_DSC7570

I left the foresight silver. Being steel, I’d need to apply a different finish (oil finishing if I were inclined to do so). However the big silver wedge in my sight picture gives me a nice aiming point even on such a small gun.

_DSC7572

Just some last pics from a couple more angles…

_DSC7575

I’m very much looking forward to using this. I may need a 1920s Gangster or Communist load out for it to look the part. Or just tuck it into my BD jacket for if I get captured.

_DSC7578

If you have enjoyed this project or have an idea of your own, drop us a line on enquiries.vintageairsoft@gmail.com to discuss. ‘Like’ our Facebook page or follow the blog to get regular updates on projects and interesting videos and articles.

To see more Webley related builds such as the carbine conversion, shotgun shells and Pritchard Bayonet take a look here.

Don’t forget you can buy our smaller items via Etsy. Our larger items can be found here.

 

 

First casting attempt

Tools, Weapons

OK, for those who have followed Vintage Airsoft for a VERY long time you will remember a couple of years back I built a kiln to try making some cast aluminium parts.

 

I have been trying to get my new version ready for use recently and have at last had my first casting session with it today. As many of you will know, I cast a lot of products from silicone moulds. I used one of these to make a wax copy of a 3D printed bolt. 

 

To this I added vents and a pouring spot. I made a bunch of these ready to do a batch of pours.

_DSF9301

These are contained within plaster moulds.

In these went into my mini oven for several hours. This has two purposes: 1. It melts the wax out of the plaster. 2. It dries out the plaster, forcing the moisture out of it. If there is any moisture left inside this can turn into steam instantaneously and crack the mould, possibly even a small explosion.

_DSF9304

As the last half hour came up I started melting the aluminium. 

_DSF9306

And then poured it into the moulds.

_DSF9308

And left it to cool…

_DSF9310

Once they cooled down, I broke them out of the moulds. 

_DSF9314

And the rest. These aren’t up to scratch for use but I am quite happy with them for a first attempt.

_DSF9315

In order to make more useful castings I think I will need to make more vents and pour the metal at a hotter temperature. I may experiment with some other casting materials and investments.

Sten suppressor model for Sten MkIIs or MkVs

Add-on kits, Products, Sten, Sub Machine-guns, Suppressed, WWII

A chap on the British WWII airsoft forum asked if anyone had made a suppressor for their Sten, so I obliged to do a post on my prototype silencer!

As with all my Sten kits (released and in development), I wanted to make this a temporary attachment that could be removed when not wanted.

So, how did I make this?

One piece of 40mm OD (Outside Diameter) mild steel pipe makes up the body of the suppressor, nothing fancy about this at all! Inside this prototype there are two square pieces of plywood with holes through the centre.

These slide over the outer barrel of the Sten and fit very snugly indeed. This makes for a very solid silencer as it has all of the strength of the inner barrel to support it.

20141120_215507

The end cap is a piece of ash, cut to rough shape. I heated a spare section of 40mm tube and used it to cauterise the rough cut cap into shape. Now I have the lathe of course I’d just turn it on that! A little epoxy will secure it in place.

_DSF5042

As the weight of the suppressor is taken by the outer barrel, all that is needed to keep it in place is a retaining screw. I used the screw hole that the heat guard uses on the standard ASG Sten.

_DSF5040

A small piece of brass flat bar bridges the gap, obviously this could also be steel.

_DSF5044

Once the canvas heat cover is on, it camouflages this admittedly unsightly joint!

_DSF5045

On this prototype I’ve just stitched the buttonholes roughly, I’ll be putting in some brass eyelets when I have bought a punching kit!

One thing to bear in mind with this conversion, it is aesthetic ONLY. In no way will this quieten your AEG down as most of the sound is created in the motor and doesn’t really travel down the barrel.

The finish is a combination of enamel paint and matte lacquer so that the metal and wood parts match up.

20141125_220841 copy

The production version of this will differ in a few ways:

1. The end cap will be entirely turned on a lathe for shaping

2. The barrel supports will either be plastic or turned round so that they fill the entirety of the barrel

3. The heat shield will have brass eyelets instead of sewn ones

Production versions will be around £50, a post will be forthcoming on completion of the first model! If you fancy a version of this, do drop us a line on: enquiries.vintageairsoft@gmail.com!

Hello and Welcome

Uncategorized

Hello there, welcome to Vintage Airsoft!

We are a group of airsofters who have a special interest in more unusual firearms that are not always available or affordable for airsoft. As well as developing kits for airsoft guns already made by other manufacturers, we are looking for opportunities to collaborate with individuals who want something a little bit special. Whether it’s anti-tank or something lightweight we would love to hear from you to help us develop something new.

On this blog we will be showing off our newest products, show a little of the process that goes into designing and building them and hopefully some skirmish reviews in the longer run.

We look forward to hearing from you.

Dom and Dave

 

We can be contacted at:

enquiries.vintageairsoft@gmail.com