LS26: Build 1

Custom builds, Inter-War (1918-1939), LS26 LMG, Machine-Guns, Weapons, WWII

This build will be another based on the ever trusty AGM Sten! The first step is to strip off the unneeded bits, grind down the unwanted protrusions etc…

_DSC7339

Then I could start tack welding the cradle together to form the receiver. Once all the parts are in place and squared up I’ll weld them in place permanently.

_DSC7341

Next up, I’m assembling the bipod. With builds like this it’s good to reduce the number of floating parts as quickly as possible, otherwise things have a habit of vanishing into the ether.

_DSC7348

The top part of the bipod pivots forward and folds back under the barrel shroud. The legs spread only as far as the limiter allows. At the bottom of each leg is the distinctive  ski-pole depth limiter. A spiked bipod is great for a solid mounting on soft ground, but once it gets too soft they tend to dig in so these will stop it from going in so far that you’d have to be King Arthur to remove it.

_DSC7350

The top cover is to be 3D printed. This allows me to get some of the awkward shapes and dimensions.

Screen Shot 2017-11-15 at 21.44.40

Once printed, some small tinkering to make it fit nicely but not much.

_DSC7430

The rear sight is adjustable for windage and elevation, with the windage leaf dovetailed in. The elevation adjustment uses a variant of my usual system with teeth locking it in place securely using spring pressure.

_DSC7431

The magazine in the magwell. This part is all 3D printed, I’ll be joining it up to the Sten using a spring much like an LMG magazine for an M249 or similar.

_DSF9966

I’ve been putting off making the barrel heat guard as I knew I’d soon have access to my Mill, which would be a much tidier and faster way of making this part. I started by drilling four holes at 90º to one another around the circumference of the tube, then went in with my end mill and cut the first four slots.
 
_DSF0052

I could then skip the left material, plunge into the next slot, then rinse and repeat until the line was done. Then rotate the workpiece 90º and do the same.

The end result is both accurate and tidy, much better than if I had done it the way I used to have to (with a drill and a grinder)_DSF0059

 

There’s still a good bit of work to do on this, but that’s for another post.

 

If you would like to see the other posts for this build, you can do so here.

If you want to check out a similarly obscure Light Machine-Gun, you can see the LMG25 articles here.

If you enjoyed this content join us over on Facebook and check out our Etsy store. If you have an idea for a custom build of your own get in touch on enquiries.vintageairsoft@gmail.com.

Advertisements

LS26: Introduction

Custom builds, History, LS26 LMG, Machine-Guns, Weapons, WWII

There isn’t a great deal written in English that I can find on the LS26 light machine gun, but let me share a general outline here and any Finnish fans can come in and correct  all the stuff I get wrong…
Winter_shooting
In 1925/26 the Finns ran trials for a light machine-gun and the LS26 won. Production began the next year and they were produced for both the Finns and the Chinese, though very few made it to China due to the Japanese putting pressure on Finland not to deliver them.
3218994
In the West, it served in the Finnish actions against the Soviets during WWII, and against the Nazis in 1944/45. It had a mixed reputation, with some gunners liking its accuracy and others despising it for its unreliability during its early days of service.

ls266
When posed against the Soviet DP-28, you can see why some Finns swapped for the Soviet gun. With a 20 round box vs a 47 round pan magazine, the DP has a significant advantage for suppressive fire. It is also simpler to strip and with wider tolerances it was more reliable in field conditions. Weight is mentioned as an issue with the LS, but given the DP is around the same weight I suspect this is more a case of weight vs capability making soldiers prefer their Russian captures.
Ls26 R trigger ass

If you want to see some footage of an LS26 and DP-28 being fired as a comparison to one another you can do so in this short video from Forgotten Weapons.

Vintage Airsoft is currently working on an LS26 for a customer, being an AEG this one should be quite nice to fire in comparison!

 

If you want to see something completely different, check out my side by side stopping rifle build here. If you have an idea of your own, drop us a line on enquiries.vintageairsoft@gmail.com to discuss. ‘Like’ our Facebook page or follow the blog to get regular updates on projects and interesting videos and articles.

 

Don’t forget you can buy our smaller items via Etsy. Our larger items can be found here.