MG08/15: Bipod and woodwork

Custom builds, Machine-Guns, MG08/15, Weapons, WWI, WWII

_DSF5437

So, this is what the MG08/15 looks like now! As you can see there are a few changes. The main development of importance as far as I am concerned is the addition of the bipod. This gun finally stands up on its own!

_DSF5431

A close-up of the bipod mount in progress. A series of disks keeps friction to a minimum. I was thinking of using 6mm bearings but it runs smoothly as-is. Given the gun will be used in (very dusty) South Africa I reckoned on simpler being better.

_DSF5434The bipod itself is folded 2mm steel sheet. Designed in CAD and laser cut, I folded it by hand. I’ve never been so hot in the workshop! This was then welded to the bottom of the pivot mechanism.

_DSF5425Woodwork is the other obvious development. Took delivery of some lovely Trend router bits that I have had my eye on for some time and set to work on the buttstock (rough cut above).  Using the convex curve of a Roman Ogee bit I rounded off the faces other than the front and back.

_DSF5436

Curved faces and Roman Ogee bit in the router.

_DSF5435

Another treat in the delivery: These rubber sanding drums fit in a standard drill chuck. A left hand thread puts pressure on the rubber to hold the sanding cylinders in place. Once you get used to setting them up, these are really effective for sanding large curved faces and even small flat faces.

_DSF5329Now I just need to get the finished buttstock to match the staining job on the pistol grip covers!

Still to go: I need to fix up the feed mechanism. All the components exist, they just need fettling to get them all working together smoothly. Then attach the ports (in and ejection). With that it will be painting and testing!

 

If this has inspired you to want a gun of your own, let me know! Drop me a line on: enquiries.vintageairsoft@gmail.com, I’d love to hear from you!

Advertisements

MG08/15 shell

Custom builds, Machine-Guns, MG08/15, Weapons, WWI, WWII

Yes, you read the title correctly, more progress on the MG08/15!

External parts this time, the whole build  is really starting to come together now. It’s best expressed in photographs so I shall let them do the talking…

_DSF5327

Right side of receiver soon after welding the grip. On the right of the picture you can see the magazine mounting for the portable 100 round ‘snail’ magazine (technically it isn’t a snail magazine, it is a belt box, I refer to it as a snail to differentiate between it and the box magazine I am building for fixed positions).

_DSF5328

A slightly soft-focus shot of the left side after tinkering with the safety switch mounting.

_DSF5326Close-up of the pistol grip. This shows the back where you can see the screw used to attach the trigger mechanism inside the gun.

_DSF5329

The first bit of woodwork for the gun, carefully shaped grips. This wood is ash stained with a blend of dyes to pick out the details. I’ll be needing to order in a special piece for the buttstock as the pieces I have are fractionally too small.

_DSF5318

Flash hider, carefully hand-cut and hammered into shape.

_DSF5331

Flash hider so far. The cone has been welded to a piece of tube that supports this component. The bulk of the rest of this part will be polymorph (the large black part here) which is still undergoing some shaping.

_DSF5333

And finally for this update, the cooling jacket. This close-up shot of the back-end shows the cover plate that attaches to the front of the gun and the hole through which the inner barrel will run.

 

As ever, if this post has inspired you, do drop us a line at enquiries.vintageairsoft@gmail.com!