The MP28 in context

Custom builds, MP28, Products, Sub Machine-guns, Weapons, WWI, WWII

Yesterday, the owner of the MP28 came to collect his new gun and kindly brought his WW1-era Sturmtruppen impression for some photographs! The whole impression is mildly terrifying and it’s fair to say you wouldn’t want him appearing in front of you on a dark night…
_DSC5517

Although the MP28 isn’t a small fire-arm, it is very compact compared to the standard German service rifle, the G98 and even compares favourably to the K98a then in service with  advance units. Add in that the rate of fire is significantly higher than any bolt-action rifle and you have a fearsome new weapon for trench raiding.

_DSC5520

Jim has made and modified much of this uniform himself.

_DSC5526

Particularly noteworthy is the gas mask, in which he has replaced the glass vision ports with  mesh.

_DSC5528

He hand-painted his Stahlhelm based on photographs of originals, that distinctive block-camouflage was used by both sides in various forms, sometimes including unexpected colours like vivid yellows and sky blues.

_DSC5530

And of course, a vital part of any Sturmtruppen’s outfit, the spade:

“But the bayonet has practically lost its importance. It is usually the fashion now to charge with bombs and spades only. The sharpened spade is a more handy and many-sided weapon; not only can it be used for jabbing a man under the chin, but it is much better for striking with because of its greater weight; and if one hits between the neck and shoulder it easily cleaves as far down as the chest”

Eric Maria Remarque, All Quiet on the Western Front.

_DSC5533

 

You can follow the long process of building the MP28 here. This version has both a safety catch and a select-fire system built in with elevation and windage-adjustable rear sight.

If this replica firearm is of interest to you, please do get in touch at: enquiries.vintageairsoft@gmail.com or join us on our Facebook page. Don’t forget you can buy many of our complete products via Etsy, though builds like this are made to order.

Sten MkI/MkI* : Complete

Add-on kits, Complete builds, Products, Sten, Sub Machine-guns, Weapons, WWII

Some images of the completed Sten MkI and MkI*. Firstly a picture of AN original for comparison. I should point out that you can find differences between nearly every surviving example so this isn’t definitive:

tumblr_mky4fuYlFr1s57vgxo1_1280

The main issue with this replica is that the safety catch is at the top of the operating handle slot (as this is based on the AGM Sten MkII). The only way to adequately redo this is to make a whole new receiver unit. Maybe a project for the future…

_DSF7039

A close up of the receiver. The new operating handle and bolt also feature the Sten safety switch kit. You can also just make out the Sten MkI stampings on the magazine housing.

_DSF7040

The foresight on this is very comfortable to acquire, at least in the confines of the workshop where I have tested it so far! This will be going out in the field at the weekend.

_DSF7042

The stock is very comfortable compared to the MkII T-stock. That said clutching a thistle is an improvement over the T-stock… But in all seriousness this is a great alternative and is fast becoming a personal favourite.

_DSF7043

One final feature worth noting is the battery compartment. Accessible from the rear, it can just about fit the standard stick battery in it, though a stick lipo would be a far easier fit.

_DSF7045

And in the Sten MkI* configuration, once it had been optimised by the Singer company for serial production:

_DSF7044

This kit will be for sale on our Etsy page HERE in due course. If you like the look of this gun and would like a build of your own that we don’t currently offer please do get in touch! Email us on enquiries.vintageairsoft@gmail.com or get in touch via our Facebook page.

MP28 Sten build Part 2

Custom builds, MP28, Sub Machine-guns, Weapons, WWI, WWII

At the end of the last piece on the MP28, I was doing battle with the fire select mechanism. I found a solution in cutting off the automatic mode altogether, not just one of the wires. Below is my original (functional) test rig.

_DSF6714

And built into a usable switch.

_DSF6754

This can be mounted into the Sten body with a screw. I have placed it at the back of the operation handle channel where it will be both accessible and discrete.

_DSF6772

One oil finished knob later and the fire select is complete. You’ll note the rather ugly M6 screw which is temporarily filling the role of op handle until one is made.

_DSF6776

Next job is to replace the trigger. The original was too short once it was set into the wooden stock. I simply cut around the top to keep the shape and improved the size and shape of the trigger blade itself.

_DSF6777 _DSF6778 _DSF6779

I fitted the battery compartment cover, this gun will take LiPo batteries which keeps the battery compartment size down.

_DSF6794

Closely fitting the buttplate before applying the finish to both parts.

_DSF6796

Several coats of Danish oil darkened up the stock and brought out the natural colouring nicely.

_DSF6807

I could then fit the oil blued buttplate with two oil-finished screws to blend in.

_DSF6814

And apply several coats of a new finish I am experimenting with that should produce a hard, wear resistant and semi-gloss surface.

_DSF6816

The bottom of the gun just after fitting the blacked trigger guard plate and battery compartment cover.

_DSF6865

The extending wire that links the battery compartment to the mechanism.

_DSF6867

Another view of the extending wire. The catch is screwed down with machine screws rather than woodscrews as it may need to be removed and this will reduce wear on the stock.

_DSF6868

And finally… with the mechanism in place.

_DSF6869

More photos and video to follow when test firing is complete!

_DSF6871

 

Like this gun? Why not email us on enquiries.vintageairsoft@gmail.com to find out more. Also, why not check out our Etsy page where we have ready-made kits and accessories?