MG08/15: The last furlong?

Custom builds, Imperial Era, Inter-War (1918-1939), Machine-Guns, MG08/15, Weapons

Thos of you who have followed Vintage Airsoft for some time will recognise this and be like: “Is he STILL working on that?”. Well, yes. I swear if something could go wrong on this build, it did. At least once. 

So, here’s hoping this is the last build post at long last!

One of the problems was the air seal between the gearbox and the hop unit. This it turned out was caused by flex between these parts, resulting in variation from shot to shot.

 

In the end, I re-designed the mounting plate to feature a hop-up ‘vise’ to hold the unit in place really solidly. There isn’t any wobble in this sod. 

_dsf8416

I had to make a few mods to the trigger unit design and the bottom of the baseplate to work together, but now the trigger raises a sear which sets off the microswitch in the gearbox itself.

_dsf8466

In place, clamped down! I’m still using the same feed system as before. 

_DSF8684

The feed tube comes out to meet the magazines.

_DSF9120

Oh yes, new grips. I wasn’t happy with the old ones, one wasn’t quite spot on, but as with all things the second attempt was much better. I’ve used hardwood this time (as opposed to laminate) and cut in cross-hatching for grip.

_DSF9140

Topping up the paintwork. 

_DSF9161

I’m really looking forward to having the finished photos on this at last.

 

If you are interested in this project or have an idea of your own, drop us a line on enquiries.vintageairsoft@gmail.com to discuss. ‘Like’ our Facebook page or follow the blog to get regular updates on projects and interesting videos and articles. 

Don’t forget you can buy our complete products via Etsy.

MG08/15: Upgraded internals

Custom builds, Machine-Guns, MG08/15, Products, Weapons, WWI, WWII

A quick video to show you what this gun shot like prior to a couple of improvements!

It was a little inconsistent, though bear in mind that this is without the hop set at all. There are several improvements that have been made since then to improve consistency and power.

Firstly, a large, stiff spring holds both the outer barrel and the hop unit in place against the gearbox.

_DSF7323

At this point, it became apparent that having quick-replacement magazines is a bit pointless as any magazine for this gun will be a high-capacity one. As a result I dropped this idea and went for the far more secure (and better feeding) fixed version.

_DSF7350

This can still be swapped between an electronic hi-cap (stored in an MG42 ammunition box, as used in WW2 with the MG08/15) and a smaller hi-cap that can be stored in the drum itself.

_DSF7353

A drum magazine lock was added to stop the drum from opening unexpectedly. The crank handle on the original was used to wind in the cloth bullet belt. It is fixed on this and the sides of the spindle hold the magazine in place.

_DSF7370

The details on the water tank, filling cap and steam hose connector.

_DSF7371

The small magazine attachment for the drum magazine. This attaches to the top of an M14 magazine.

_DSF7372

A top-up of paint to get it pretty before testing!

_DSF7374

Ready to go!

_DSF7382

The elevation adjustment and rear sight.
_DSF7387

 

If this post has inspired you to want a gun of your own, do drop us a line on enquiries.vintageairsoft@gmail.com to discuss or find us on Facebook.

MG08/15: Bipod and woodwork

Custom builds, Machine-Guns, MG08/15, Weapons, WWI, WWII

_DSF5437

So, this is what the MG08/15 looks like now! As you can see there are a few changes. The main development of importance as far as I am concerned is the addition of the bipod. This gun finally stands up on its own!

_DSF5431

A close-up of the bipod mount in progress. A series of disks keeps friction to a minimum. I was thinking of using 6mm bearings but it runs smoothly as-is. Given the gun will be used in (very dusty) South Africa I reckoned on simpler being better.

_DSF5434The bipod itself is folded 2mm steel sheet. Designed in CAD and laser cut, I folded it by hand. I’ve never been so hot in the workshop! This was then welded to the bottom of the pivot mechanism.

_DSF5425Woodwork is the other obvious development. Took delivery of some lovely Trend router bits that I have had my eye on for some time and set to work on the buttstock (rough cut above).  Using the convex curve of a Roman Ogee bit I rounded off the faces other than the front and back.

_DSF5436

Curved faces and Roman Ogee bit in the router.

_DSF5435

Another treat in the delivery: These rubber sanding drums fit in a standard drill chuck. A left hand thread puts pressure on the rubber to hold the sanding cylinders in place. Once you get used to setting them up, these are really effective for sanding large curved faces and even small flat faces.

_DSF5329Now I just need to get the finished buttstock to match the staining job on the pistol grip covers!

Still to go: I need to fix up the feed mechanism. All the components exist, they just need fettling to get them all working together smoothly. Then attach the ports (in and ejection). With that it will be painting and testing!

 

If this has inspired you to want a gun of your own, let me know! Drop me a line on: enquiries.vintageairsoft@gmail.com, I’d love to hear from you!