Airsoft G3: External upgrades and safe bayonet

Most of this work I did a little while ago, a friend asked me to fit their wooden original furniture to their airsoft G3. This work was a lot of small, fine adjustments so I didn’t really photograph the process. You can however enjoy the end result!

On the other side. If you look closely you can see that the thread for the front sling mount has been replaced with a steel nut as it had stripped out (threads in aluminium don’t last that well).

A closer view at the buttstock end. Although the receiver shape is about right, it needed thinning out in a few places to fit the stock.

I added a real steel magazine catch, the AEG one was aluminium and quite fragile in my opinion. This steel one needed a collar machining so that the parts would move smoothly in the AEG trigger group.

A closer look at the fore-end. Fitting the hand guard was mainly shaving away material at the top to fit around the barrel support.

The buttstock is already hollow, to reduce weight I would imagine. This has the added bonus of allowing you to fit a LiPo battery inside. The cable runs from the gun, through the hole which the support column uses on the real thing (you may also be able to drill through this if you want to keep it).

Now, the bayonet; a rifle really isn’t complete without one. This is cast from an original in hard rubber.

The gas plug needs drilling out to take the stem that locks the bayonet in place on this AEG.

Unusually, the G3 bayonet sits above the barrel, just ahead of the foresight. On a rifle of this format I can see this providing better leverage for twisting out of a body. Not that this concerns us with airsoft/re-enacting of course…

This photo has been taken with the rifle at a slight angle to show the natural flex of the bayonet blade.

 

If you like this build you can see other complete projects here. If you have an idea of your own, drop us a line on enquiries.vintageairsoft@gmail.com to discuss. ‘Like’ our Facebook page or follow the blog to get regular updates on projects and interesting videos and articles.

 

Don’t forget you can buy our smaller items via Etsy. including this G3 bayonet. Our larger items can be found here.

 

Enfield No.4 Rubber Spike Bayonet

With a VSR No.4 Enfield in the works, I got ahead of the game by making a bayonet for it. I initially started making this for an RWA No.4, but we all know how those went down (if you don’t know, they went badly).

The bayonet is composite plastic and rubber, to make the most of the complimentary properties of the materials. As you can see, I’ve kept the markings on the socket.

The best thing is that it locks onto the rifle, so as well as being less likely to drop off the gun, you get to enjoy fixing bayonets with that distinctive twist and click of the socket.

And of course it fits in an original scabbard.

 

If you fancy a spike bayonet of your own, you can buy it here on Etsy. You can see the build posts for my VSR No.4 Enfield here when they are posted.

 

If you have like this project or have an idea of your own, drop me a line on enquiries.vintageairsoft@gmail.com to discuss. ‘Like’ the Facebook page or follow the blog to get regular updates on projects and interesting videos and articles.

New rubber melee weapons

It’s been a while since I did a post about melee weapons, but there are a few items now available in the Etsy shop which may be of interest to followers of the blog.

 

BC-41

The BC-41 was an early fighting knife adopted by the British Commandos. Inspired by earlier Trench Knives, this is great for an inexperienced knife fighter who can punch and slash and be fairly likely to do some damage.

It was fairly quickly put aside in favour of the Fairbairn-Sykes design, which was much more flexible in use due to being able to hold it in a variety of ways. Ideal for the experienced and practiced knife fighter, though some would argue of questionable use to the average soldier.

You can find the BC41 here.

 

Fairbairn-Sykes

The mould for the Second Pattern died a death recently and I reckoned it was time to do something a little different. The new knife is a First Pattern, though at a glance it could easily pass for a Second Pattern.

As with the previous model, it is stiffened so that it doesn’t flop about. This is aided by a new rubber I am using for thin blades which is slightly harder.

It has an optional sheath based on the second pattern version to keep costs down, though it should fit in a repro sheath if you already have one.

You can find the Fairbairn-sykes here.

 

NR40

For the Soviets among you, the NR40 will serve you well for WWII and post-war impressions. Although it has long since been replaced in service, privately procured ones have remained popular with Russian soldiers.

Once again, this is stiffened and uses the new rubber mentioned above to maintain stiffness on this relatively thin blade. This is cast from a reproduction but should fit in original and repro scabbards.

The NR40 is here.

 

You can take a look at the Etsy store for these and other interesting and unusual items, but don’t forget to join us over on Facebook where there’s nearly always something interesting going on.

Kukri- Floppy replica!

When showing off the original kukri replica, a good number of people commented that on their airsoft sites don’t allow for solid melee weapons and that they have to be flexible.

The people spoke, we listened! As a result, this foam cast version is now available on our brand new etsy page.

Original resin model bottom, foam above.

Flexible enough for safe use in the field!

So, we hope you like it! If you want to buy your own kukri you can do so here.

Why not join us on Facebook? Don’t forget you can follow the blog and get updates straight to your email inbox!