Webley MkVI Snubnose revolver

Complete builds, Custom builds, Inter-War (1918-1939), pistol, Weapons, webley, WWI

As this build was a pretty quick one I didn’t take many pictures. It all started with a spare Webley revolver that wasn’t perfect (being the Well model) but I wanted to do something interesting with. So, I marked  a line on the barrel and…

25397539_10213410107159897_76443719_o

Chopped it off. Now, there was a bit more to the job than that.

I had to make a new foresight, held in place by two screws. There is a new muzzle, which supports the inner barrel and keeps the barrel return spring in place. The inner barrel had to be shortened and recrowned on the lathe, as well as having the barrel return spring guide cut into it.

25353547_10213410106039869_1800521981_o

The eagle eyed will also spot that the rear sight/locking bridge has been shortened to make it easier to draw from a concealed holster. Due to the paint finish being damaged in the process of chopping the barrel off, I decided to take it all off. It looks good in silver.

_DSC7559

But it looks better blacked. This is my first attempt with Birchwood Casey’s Aluminium black. It’s pretty good, better than I expected for sure. It was improved massively by a thin coat of silicone oil rubbed into the surface with a dry cloth, bringing it up to a dull shine rather than just a drab finish.

_DSC7569

As you can see, there are a few spots around the muzzle where it hasn’t reacted properly for some reason, but I can touch it up later if I feel the need. To be honest I think it helps give it a bit of a worn look, a snubnose shouldn’t look pristine, they’re a working gun.

_DSC7570

I left the foresight silver. Being steel, I’d need to apply a different finish (oil finishing if I were inclined to do so). However the big silver wedge in my sight picture gives me a nice aiming point even on such a small gun.

_DSC7572

Just some last pics from a couple more angles…

_DSC7575

I’m very much looking forward to using this. I may need a 1920s Gangster or Communist load out for it to look the part. Or just tuck it into my BD jacket for if I get captured.

_DSC7578

If you have enjoyed this project or have an idea of your own, drop us a line on enquiries.vintageairsoft@gmail.com to discuss. ‘Like’ our Facebook page or follow the blog to get regular updates on projects and interesting videos and articles.

To see more Webley related builds such as the carbine conversion, shotgun shells and Pritchard Bayonet take a look here.

Don’t forget you can buy our smaller items via Etsy. Our larger items can be found here.

 

 

Advertisements

Enfield No.5 Mk 1: Complete

Cold War, Complete builds, Custom builds, Lee-Enfield, No. 5 Enfield, Rifles, Weapons, WWII

Well, the No.5 Enfield is complete! And she ain’t a bad looker though I say so myself. Not to mention as far as I know the world’s first Airsoft Enfield No.5.

Let’s talk through her from back to front.

_DSC7471

The buttpad is hard rubber, in an ABS 3D printed cage re-enforced with Polymorph.

_DSC7475

The 3D printed receiver covers the VSR internals for the most part. The trigger is a little square, I’ll probably round it off more for a comfort.

_DSC7476

The rear sight. A bit of tinkering and I may even make it so that I can use the ladder sight for longer range use. For my purposes at present however (a 1 Joule rifle for close, quiet use) the battle sight is just what I need.

_DSC7478

When testing, the windage adjustment in the foresight was very useful. I’ll have to add some elevation adjustment as well as that would come in handy.

_DSC7477

The hop adjustment the most discrete I’ve done on an Enfield yet. That little hole in the top guard is the TDC hop adjustment.

_DSC7479

The magazine well is my standard VSR quick-load magwell. Ideal for the close work I intend to use it for.

_DSC7568

Last but not least, the rear sling bracket. Distinct and unique to the No.5 carbine, this makes an odd pairing with the conventional forward sling swivel. That said I have found it quite comfortable in use, with the gun swinging around less than with conventional swivels.

_DSC7566

 

If you have enjoyed this project or have an idea of your own, drop us a line on enquiries.vintageairsoft@gmail.com to discuss. ‘Like’ our Facebook page or follow the blog to get regular updates on projects and interesting videos and articles.

You can see the build for this rifle here.

Don’t forget you can buy our smaller items via Etsy. Our larger items can be found here.

 

Pritchard-Greener Bayonet: Complete

Complete builds, Edged Weapons, pistol, Pritchard Bayonet, Weapons, webley, WWI

The Airsoft Pritchard-Greener is finished, after some significant time!

I’ve been looking forward to this for so long, I can’t wait to use it in the field.

_DSC7262

This one is mounted on my trusty old Wingun. The rubber blade holds its shape well, but like my knives is soft enough to be safe to use on people.

_DSC7265

Although there is no locking catch on this, the friction of the holding spring and the close fit keep it securely in place.

_DSC7266

As mentioned in the build post, the sight picture of this is excellent. That deep ‘W’ shape is great for dropping people into and firing.

_DSC7267

And like the original, the revolver can still break open to reload.

_DSC7270
You can find the build and history post here.

If you like this project or have an idea of your own, drop us a line on enquiries.vintageairsoft@gmail.com to discuss. ‘Like’ our Facebook page or follow the blog to get regular updates on projects and interesting videos and articles.

If you would like to see more builds from the Great War, you can find them here.

Don’t forget you can buy our complete products via Etsy.

LMG25: Complete

Complete builds, Custom builds, Inter-War (1918-1939), LMG25, Machine-Guns, Weapons, WWII

The finished LMG25 is a funny-looking beast!

_1010002

The magazine isn’t quite right, the one shown is a standard stamped metal AK magazine. The plan is to modify some more modern AK magazines to resemble the smooth sided LMG mags.

_1010003

 

_1010004

The leather strap to hold the bipod is correct. Most guns use a mechanical latch to lock bipods in place, but this system overcomes the risk of undetected corrosion or dirt ingress.

_1010005

The foresight and muzzle.

_1010006

Now they’re painted up, they blend in quite nicely with the rest of the gun.

_1010007

The bottom strap on this securely holds the receiver in place.

_1010009

The extremely wide rear sling swivel is for a two-piece sling, which allows the gun to be work like a pack.

_1010011

The only part I’m not 100% happy with is the magazine well. If I were to do this again, I would attach it straight through into the receiver tube with bolts, rather than with protruding lugs welded on as I did here.

_1010012

The trigger placement is strange, but authentically so. This gives it an odd trigger pull, but it is comfortable enough once you get used to it.

_1010013

 

If you would like to see the build posts for this, you can do so here.

If you want to know the history of this obscure Swiss Light Machine-Gun then you can check out the pre-build piece here.

If you enjoyed this content join us over on Facebook and check out our Etsy store. If you have an idea for a custom build of your own get in touch on enquiries.vintageairsoft@gmail.com.

M2 60mm Mortar: Complete

Area effect, Area-effect, Cold War, Complete builds, Custom builds, M2 60mm Mortar, Products, Weapons, WWII

The mortar is finished, and what a beauty she is too, though I say so myself.

P1010094 copy

The adjustable windage is quite smooth, the folding handle giving adequate purchase and leverage.

P1010095 copy

While the leg spreading system has its advantages, I can’t help but feel there are simpler designs that would have had the same result. Perhaps the reasoning is plainer with a live firing version.

P1010096 copy

The baseplate has a 3D printed socket for the ball to slot into. On the original this is stamped into the plate design and features a lock, but here the ball is left free so that the barrel can be quickly upended and spent shells ejected.

P1010097 copy

The spikes on the bipod should keep it raised just high enough to give access to the elevation control in the centre.

P1010099 copy

A top-down view, showing the windage lever in the stowed position.

P1010101 copy

Once packed away, this mortar isn’t actually too bad for portability. Considering the complexity and the precision you could achieve out to a respectable range on the original, you can see why modern light mortars are more closely related to this package than the T89 or SMBL 2″ families. While they may have portability and speed on their side, the ability to fine-tune fire for only a little extra weight and bulk certainly has its appeal.

P1010103

 

If you liked this project or have an idea of your own, drop us a line on enquiries.vintageairsoft@gmail.com to discuss. ‘Like’ our Facebook page or follow the blog to get regular updates on projects and interesting videos and articles.

You can find the build posts for this mortar here.

Don’t forget you can buy some of our complete products via Etsy. If you would like to commission a build like this, please drop us a line on the above email.

 

K98k: Complete

Complete builds, Custom builds, K98k, Weapons, WWII

The VSR K98k is now finished, and she is a pretty one.

_DSC7255

From the outside, the only major giveaway that this is not a real K98k is the VSR magwell in the belly. The eagle-eyed may notice the bolt handle being set back a little (alas unavoidable). 

_DSC7261

The oil blued barrel fits in with the existing metalwork and furniture nicely. As it dulls with age it will fit in better.

_DSC7256

The 3D printed rear sight, which is part of the kit I will be offering people who want to do their own K98k conversion

_DSC7257

The back cap looks the part, even if it doesn’t function. It is certainly an improvement on the original VSR cap!

_DSC7258

Likewise the bolt stop, has no function on this but really adds to the replica. For the uninitiated to the Mauser system, this catch holds and releases the bolt during use and disassembly respectively.

_DSC7260

 

If you are interested in the history of the K98k, you can check out the introduction article here, or see the whole build process here.

If you like this project or have an idea of your own, drop us a line on enquiries.vintageairsoft@gmail.com to discuss. ‘Like’ our Facebook page or follow the blog to get regular updates on projects and interesting videos and articles.

Don’t forget you can buy many of our complete products via Etsy.

G98 VSR: Complete

Complete builds, Custom builds, G98, G98 VSR, Inter-War (1918-1939), Rifles, Weapons, WWI, WWII

After the last build post, the G98 is finished! Time to take a look at those last details.

_DSF9746

The fore-end is pretty much unchanged externally.

_DSF9747

At the back, the new back cap crowns the rear of the bolt. Although entirely decorative, it does make a difference to the look of the thing.

_DSF9748

There is also a faux bolt release, used on the real thing for disassembly.

_DSF9749

The Vizier rear sight.

_DSF9750

Which is capable of full elevation adjustment.

_DSF9751

 

_DSF9752

The bayonet will be a useful addition, especially when this is used as a musket for American Civil War airsoft. This is a new design I’ve not tried before and will be trialling it on this and the SMLE.

_DSF9753

Making longer bayonets that are stiff enough to look the part and work safely for airsoft is quite tricky: rubber is too floppy, wire stiffening isn’t strong enough and most fibreglass stiffeners are too hard for guaranteed safe use.

_DSF9757

I feel this plastic blade has the balance of flexibility and stiffness just right. For this and the SMLE bayonets it’s about right, though for longer bayonets it may need a couple of layers of lamination to hold shape. That said, there are only so many bayonets that are longer than 17″ for the eras I cover!

_DSF9758

 

 

If you like this project or have an idea of your own, drop us a line on enquiries.vintageairsoft@gmail.com to discuss. ‘Like’ our Facebook page or follow the blog to get regular updates on projects and interesting videos and articles.

If you would like to see the little intro I wrote for the first G98 build you can see it here.

To see the build for this rifle, see here.

Don’t forget you can buy our complete products via Etsy. If you would like a build like this, please drop us a line on the above email.

Lanchester MkI*: Complete

Complete builds, Custom builds, Lanchester, Products, Sub Machine-guns, Weapons, WWII

So, the Lanchester is finished! And I am in love, though I say so myself.

_DSF9334

Details, the new magazine well closely resembles the original and is an improvement on the Sten original. I have brazed the mag catch head so that when it wears it looks brassy.

_DSF9335

The foresight and bayonet lug. This should take a rubber SMLE bayonet if the owner decides to do so!

_DSF9336

The trigger is set back, the pull is a little unusual but not bad.

_DSF9337

The buttplate, steel, though a brass SMLE buttplate could be substituted in here.

_DSF9338

The rear locking lug is just for looks on this. A hinge is quite hard to do but may be doable in the future. For now you can remove the lock and back cap to replace the battery. Unfortunately the wrist of this stock is too slim to drill through to a larger battery compartment in the buttstock.

_DSF9339

 

You can check out the build process for this gun here.

 

If you like this build, you may like to take a look at where it came from, the MP18 and its extended family.

 

Don’t forget to subscribe to the blog or join us on Facebook for more! You can buy some of our ready-made products on Etsy. You can also email to enquire about custom or special builds on enquiries.vintageairsoft@gmail.com.

 

P.S.: If anyone wants a Lanchester with this awesome period tac-light please DO get in touch. 

Fighting_in_the_Dark._2_January_1943,_Liverpool,_the_Navy's_Lanchester_Gun_Fitted_With_Illumination_Attachment_For_Night_Operation._A13831

Japanese T89 ‘knee’ mortar

Area effect, Area-effect, Complete builds, Custom builds, Inter-War (1918-1939), T89 'Knee' Mortar, Weapons, WWII

I was recently given this replica T89 mortar replica to convert to fire TAGS. I hope someday to make my own from scratch with a bit more detailing and moving parts.

_DSF8460 copy

The first step is to fit a firing pin. This is quite simple, I tapped two disks and threaded them onto a bolt to create a stable unit. This can be pushed down to the bottom of the barrel.

_DSF8462

The shells are steel tubes with custom-made caps. This is the prototype, there is a second hole in the production versions to allow quick refiling of the TAGs. The bottom plate is held on by spring pressure.

_DSF8463

There are two rows of spacers. The bottom one keeps the shell centred in the barrel, the top, thicker row allows the user to line up the shell before dropping it into the barrel for firing.

_DSF8464

The completed shells.

_DSF8681

I’ll be taking lessons learned from this design to apply to my other mortars and heavy weapons. I’ll also be offering these quickfill shells as an alternative to the standard 2″ mortar shells I’m providing with the SMBL mortar.

 

If you want a mortar of your own, please do get in touch at: enquiries.vintageairsoft@gmail.com or join us on our Facebook page. Don’t forget you can buy our complete products via Etsy.

FG42: First production model: Improvements

Battle Rifles, Complete builds, Custom builds, FG42, Weapons, WWII

First things first, a locking system for the bipod. It flopped around a lot on the pre-production version so I have added locking lugs. This should hold it in both deployed and carry positions.

The new receiver and trigger group. The shape has been changed significantly, losing the fore-end entirely which allows for a much stronger wood fore-stock. The back has been extended to fill out the buttstock and support it fully.

The pistol grip has also changed to fit the new grips I am making.

I bought in some repro grips from the US and modified them with polymorph to fill in the air gap and make them really solid.

I then made rubber moulds of these modified grips and poured copies.

The new magazine well is a big improvement. It locks up very tightly on the magazine.

I have modified the Sten barrel to fit an extension. The gas port is welded directly onto the receiver.

The new foregrip in place. This is much more solid than the first version and will have a correct-looking curve across the top.

I sanded down the woodwork and stained it. Finishing it with hardwax oil.

I then cut a slot matching that in the receiver up into the gas tube for the operating handle in order to allow it to move.

Some of the new parts having their first coat of paint. I’m looking into 3D printed versions of some of these, but need to test out the strength of the parts.

_DSF8940

In position on the gun. 

20170328_200027

The bipod locked down, so far, so good!

20170328_200210

The new gas tube cover.

20170328_200228

There are a few other small changes, but this article covers the vast majority. I hope to have the first  production model completed this week!

 

If this build is of interest to you, please get in touch at: enquiries.vintageairsoft@gmail.com or join us on our Facebook page. Don’t forget you can buy our complete products via Etsy.