Airsoft G3: External upgrades and safe bayonet

Cold War, Complete builds, Custom builds, G3, G3 Bayonet, War on Terror, Weapons

Most of this work I did a little while ago, a friend asked me to fit their wooden original furniture to their airsoft G3. This work was a lot of small, fine adjustments so I didn’t really photograph the process. You can however enjoy the end result!

_DSC8985

On the other side. If you look closely you can see that the thread for the front sling mount has been replaced with a steel nut as it had stripped out (threads in aluminium don’t last that well).

_DSC8988

A closer view at the buttstock end. Although the receiver shape is about right, it needed thinning out in a few places to fit the stock.

_DSC8986

_DSC8991

I added a real steel magazine catch, the AEG one was aluminium and quite fragile in my opinion. This steel one needed a collar machining so that the parts would move smoothly in the AEG trigger group.

_DSC8992

A closer look at the fore-end. Fitting the hand guard was mainly shaving away material at the top to fit around the barrel support.

_DSC8987

The buttstock is already hollow, to reduce weight I would imagine. This has the added bonus of allowing you to fit a LiPo battery inside. The cable runs from the gun, through the hole which the support column uses on the real thing (you may also be able to drill through this if you want to keep it).

_DSC8994

Now, the bayonet; a rifle really isn’t complete without one. This is cast from an original in hard rubber.

_DSC8963

The gas plug needs drilling out to take the stem that locks the bayonet in place on this AEG.

_DSC8964

Unusually, the G3 bayonet sits above the barrel, just ahead of the foresight. On a rifle of this format I can see this providing better leverage for twisting out of a body. Not that this concerns us with airsoft/re-enacting of course…

_DSC8965

This photo has been taken with the rifle at a slight angle to show the natural flex of the bayonet blade.

_DSC8966

 

If you like this build you can see other complete projects here. If you have an idea of your own, drop us a line on enquiries.vintageairsoft@gmail.com to discuss. ‘Like’ our Facebook page or follow the blog to get regular updates on projects and interesting videos and articles.

 

Don’t forget you can buy our smaller items via Etsy. including this G3 bayonet. Our larger items can be found here.

 

Advertisements

MAS 36: Complete

Cold War, Complete builds, Custom builds, MAS 36, Products, Rifles, Weapons, WWII

Though I say so myself, she’s rather nice. When I first took on the MAS 36 build, it was just an interesting commission. Now, I rather want one. A fascinating rifle and it’s satisfying to have an airsoft version of it.

_DSC8957

The far side, showing the sling arrangement.

_DSC8959

The rear sight is designed along the same lines as the original.

_DSC8912

To adjust the elevation, you press down the leaf and move the slider. The markings are visible in this picture as well, recessed deep into the receiver like the originals

_DSC8913

The VSR magwell, shared between the foreguard and receiver. As you can see, this is the MkII magwell, which allows you to fit an extension if you struggle with the catch, useful for cold weather if you have to wear gloves.

_DSC8915

The 3D printed middle band. It should be strong enough for use as I thickened it quite significantly, not to mention the steel screw running through it

_DSC8917

The original woodwork really adds to this build. As and when I can do another I may make the top guard a good bit skinnier.

_DSC8918

The bolt, all oil finished. Though I say so myself it looks the part.

_DSC8921

The bolt handle operates at 90º, like the original.

_DSC8924

At the front, something important was missing. I realised it was the bayonet. I had a MAS bayonet mould made up already for the FG42, so I made another and adjusted it to fit.

_DSC8925

Every rifle wants a bayonet really, but especially when it is built in. This one has a plastic stiffener running through it to prevent excessive wobble.

_DSC8927

 

If you like this build you can see the rest of the project here. If you have an idea of your own, drop us a line on enquiries.vintageairsoft@gmail.com to discuss. ‘Like’ our Facebook page or follow the blog to get regular updates on projects and interesting videos and articles.

 

Don’t forget you can buy our smaller items via Etsy. Our larger items can be found here.

Vz. 24: Complete

Complete builds, Custom builds, Inter-War (1918-1939), Products, Rifles, Vz.24, Weapons, WWII

The Vz.24, VSR base. Like the K98k builds, this was destined to be a pretty gun.

_DSC8897

This build has used a lot of original parts, which really adds to the air of authenticity.

_DSC8896

The straight bolt handle and cut back top guard is reminiscent of the very early Vz series.

_DSC8898

The rear sight is 3D printed, as needs must to fit the VSR base.

_DSC8901

It is adjustable for elevation, underneath the sight leaf is the TDC hop adjustment.

_DSC8902

The Mauser back cap and locking block are almost identical to the K98k model.

_DSC8905

The opposite side, where you can see the alternative sling arrangement. Rather unusually for the era, this rifle has several sling mounting options that allow the rifle to be shoulder or back slung fairly comfortably.

_DSC8907

The middle band is original, a rather pleasing feature. The lower swivel was surprisingly tricky to find.

_DSC8908

The wrist swivel. An unusual location, but fine so long as you’re not left handed.

_DSC8909

This rifle was started while I was still using my MkI steel VSR magwells. As a result, it still has this model. Future versions will use my MkII magwell.

_DSC8910

The buttplate, which interestingly is interchangeable with the G98.

_DSC8911

 

If you like this build you can see the rest of the project here. If you have an idea of your own, drop us a line on enquiries.vintageairsoft@gmail.com to discuss. ‘Like’ our Facebook page or follow the blog to get regular updates on projects and interesting videos and articles.

 

Don’t forget you can buy our smaller items via Etsy. Our larger items can be found here.

Enfield No.4 Rubber Spike Bayonet

Cold War, Complete builds, Edged Weapons, Lee-Enfield, No. 4 L-E, No.4 Spike bayonet, Weapons, WWII

With a VSR No.4 Enfield in the works, I got ahead of the game by making a bayonet for it. I initially started making this for an RWA No.4, but we all know how those went down (if you don’t know, they went badly).

_DSC8242

The bayonet is composite plastic and rubber, to make the most of the complimentary properties of the materials. As you can see, I’ve kept the markings on the socket.

The best thing is that it locks onto the rifle, so as well as being less likely to drop off the gun, you get to enjoy fixing bayonets with that distinctive twist and click of the socket.

_DSC8239

And of course it fits in an original scabbard.

_DSC8234

 

If you fancy a spike bayonet of your own, you can buy it here on Etsy. You can see the build posts for my VSR No.4 Enfield here when they are posted.

 

If you have like this project or have an idea of your own, drop me a line on enquiries.vintageairsoft@gmail.com to discuss. ‘Like’ the Facebook page or follow the blog to get regular updates on projects and interesting videos and articles.

The DeLisle Commando Carbine: Build

Cold War, Delisle, Lee-Enfield, Suppressed, Weapons, WWII

The DeLisle is VSR based, so this acts as the joining unit between the different parts. Due to the sheer size of the suppressor however this will pretty much be joined as part of the chassis.

At the fore-end, the front cap is 3D printed, as is an internal spacer.

_DSC8294

At the back of the suppressor is the rear sight, a simple V-notch on an elevation leaf.

_DSC8298

The woodwork on this is in three parts, the buttstock, receiver housing and forestock. Once I had carved out the internal shapes for the receiver and magazine well, I could shape the outside.

_DSF0054

Once all the parts were roughly shaped and strapped down to the VSRI added the re-enforcing band. I’m not sure this was strictly necessary, but it was on the original so on it goes!

_DSF0055

The band had to be cut back for the magazine well, but it will make quite a nice tactile reverence point if the gun is used in the dark.

_DSC5716

Fitting the faux magazine well in permanently, this 3D printed part is fitted with a machine screw through the stock so it’s pretty solidly mounted.

_DSC5717

At the front, I turned the inner barrel down to the correct length.

_DSC5721

At this stage, it’s mostly finishing and painting work to do, which isn’t very interesting to see so the next time you see this, it will be the finished item!

If you are interested in this build you can see the rest of the project here. If you have an idea of your own, drop us a line on enquiries.vintageairsoft@gmail.com to discuss. ‘Like’ our Facebook page or follow the blog to get regular updates on projects and interesting videos and articles.

 

Don’t forget you can buy our smaller items via Etsy. Our larger items can be found here.

LS26: Build 1

Custom builds, Inter-War (1918-1939), LS26 LMG, Machine-Guns, Weapons, WWII

This build will be another based on the ever trusty AGM Sten! The first step is to strip off the unneeded bits, grind down the unwanted protrusions etc…

_DSC7339

Then I could start tack welding the cradle together to form the receiver. Once all the parts are in place and squared up I’ll weld them in place permanently.

_DSC7341

Next up, I’m assembling the bipod. With builds like this it’s good to reduce the number of floating parts as quickly as possible, otherwise things have a habit of vanishing into the ether.

_DSC7348

The top part of the bipod pivots forward and folds back under the barrel shroud. The legs spread only as far as the limiter allows. At the bottom of each leg is the distinctive  ski-pole depth limiter. A spiked bipod is great for a solid mounting on soft ground, but once it gets too soft they tend to dig in so these will stop it from going in so far that you’d have to be King Arthur to remove it.

_DSC7350

The top cover is to be 3D printed. This allows me to get some of the awkward shapes and dimensions.

Screen Shot 2017-11-15 at 21.44.40

Once printed, some small tinkering to make it fit nicely but not much.

_DSC7430

The rear sight is adjustable for windage and elevation, with the windage leaf dovetailed in. The elevation adjustment uses a variant of my usual system with teeth locking it in place securely using spring pressure.

_DSC7431

The magazine in the magwell. This part is all 3D printed, I’ll be joining it up to the Sten using a spring much like an LMG magazine for an M249 or similar.

_DSF9966

I’ve been putting off making the barrel heat guard as I knew I’d soon have access to my Mill, which would be a much tidier and faster way of making this part. I started by drilling four holes at 90º to one another around the circumference of the tube, then went in with my end mill and cut the first four slots.
 
_DSF0052

I could then skip the left material, plunge into the next slot, then rinse and repeat until the line was done. Then rotate the workpiece 90º and do the same.

The end result is both accurate and tidy, much better than if I had done it the way I used to have to (with a drill and a grinder)_DSF0059

 

There’s still a good bit of work to do on this, but that’s for another post.

 

If you would like to see the other posts for this build, you can do so here.

If you want to check out a similarly obscure Light Machine-Gun, you can see the LMG25 articles here.

If you enjoyed this content join us over on Facebook and check out our Etsy store. If you have an idea for a custom build of your own get in touch on enquiries.vintageairsoft@gmail.com.

LS26: Introduction

Custom builds, History, LS26 LMG, Machine-Guns, Weapons, WWII

There isn’t a great deal written in English that I can find on the LS26 light machine gun, but let me share a general outline here and any Finnish fans can come in and correct  all the stuff I get wrong…
Winter_shooting
In 1925/26 the Finns ran trials for a light machine-gun and the LS26 won. Production began the next year and they were produced for both the Finns and the Chinese, though very few made it to China due to the Japanese putting pressure on Finland not to deliver them.
3218994
In the West, it served in the Finnish actions against the Soviets during WWII, and against the Nazis in 1944/45. It had a mixed reputation, with some gunners liking its accuracy and others despising it for its unreliability during its early days of service.

ls266
When posed against the Soviet DP-28, you can see why some Finns swapped for the Soviet gun. With a 20 round box vs a 47 round pan magazine, the DP has a significant advantage for suppressive fire. It is also simpler to strip and with wider tolerances it was more reliable in field conditions. Weight is mentioned as an issue with the LS, but given the DP is around the same weight I suspect this is more a case of weight vs capability making soldiers prefer their Russian captures.
Ls26 R trigger ass

If you want to see some footage of an LS26 and DP-28 being fired as a comparison to one another you can do so in this short video from Forgotten Weapons.

Vintage Airsoft is currently working on an LS26 for a customer, being an AEG this one should be quite nice to fire in comparison!

 

If you want to see something completely different, check out my side by side stopping rifle build here. If you have an idea of your own, drop us a line on enquiries.vintageairsoft@gmail.com to discuss. ‘Like’ our Facebook page or follow the blog to get regular updates on projects and interesting videos and articles.

 

Don’t forget you can buy our smaller items via Etsy. Our larger items can be found here.

 

Sten Suppressor MkII

Cold War, Complete builds, Sten, Sten Suppressor, Sub Machine-guns, Suppressed, Weapons, WWII

I realised the other day that I hadn’t updated my Sten Suppressor pictures in about two years, in spite of making this much nicer model for some time.

_DSC8351

This replica can be used correctly on the MkII and Mk5 Stens, the latter format would make it a Mk6 if you were so inclined.

_DSC8353

_DSC8244

I’m using a thicker canvas for the cover than before and a thick cotton cord, ready laced up in the correct format (straight laced, like British Army boots).

_DSC8245

A securing screw locks it into place on the barrel.

_DSC8246

The front cap is made from cast rubber.

_DSC8169

 

If you want a suppressor of your own, you can buy it here.

Don’t forget you can buy many of our smaller items via Etsy. Our larger items can be found here

 

If you have an idea of your own, drop us a line on enquiries.vintageairsoft@gmail.com to discuss. ‘Like’ our Facebook page or follow the blog to get regular updates on projects and interesting videos and articles.

Stopping Rifle: Build 3

Imperial Era, Sporting Arms, Stopping Rifle, Weapons, WWI

The forestock fitted in place is a little bit longer than the original but is fastened in the same way.

_DSF9949

This definitely improves the overall shape of the rifle.

_DSF9947

With the woodwork shaped and the buttplate fitted I applied a few layers of finish, leaving it to dry.

_DSF9980

In the metalwork department, I stripped the original paintwork from it. Underneath is aluminium of some kind, though some parts are an odd coppery colour.

_DSF9983

I applied Birchwood and Casey’s aluminium black. A couple of coats later and I have a nice dappled finish across the surface.

_DSF9985

The buttplate, being steel, is brushed smooth (though with a swirling pattern of sorts left on for some semblance of grip) and heated to a dull red before being quenched in oil. This leaves a rather pleasing mixed-colour finish varying from straw to light blue.

_DSF9986

The screws are blacked to fit in.

_DSF9987

The last bit is to mark up the rifle appropriately. On the bottom plate I’m marking the gun with my details and the ‘calibre’. Though it’s not technically .700 NE, the shells are actually very close.

_DSC8301

The first step is a quick going over of the script to give a shallow etch to follow. One can then lift the paper to check the etch is deep enough in a few places before removing the whole lot.

_DSF9988

With the paper removed, I add depth and boldness to the capitals and detailing in the few places I have the skill to add it.

_DSF9989

Once all the text is to depth, I used Birchwood Casey’s aluminium black as per the rest of the gun. In the picture below you can see where the back of the foregrip assembly had an argument with my planer, which was a sad event. That being said, I hope to make a replacement in the near future.

_DSF9990

I’m pretty pleased with how the script came out. This is only my second attempt at engraving work and I feel it is quite an improvement over the first. I’m not 100% happy with the calibre, but the script typeface isn’t too bad.

_DSF9991

This is basically finished now, so photographs of the complete item to follow!

 

If you are interested in this project you can see the rest of the project here. If you have an idea of your own, drop us a line on enquiries.vintageairsoft@gmail.com to discuss. ‘Like’ our Facebook page or follow the blog to get regular updates on projects and interesting videos and articles.

 

Don’t forget you can buy our smaller items via Etsy. Our larger items can be found here.

Stopping Rifle: Complete

Complete builds, Custom builds, Imperial Era, Products, Sporting Arms, Stopping Rifle, Weapons, WWI

At long last, the Stopping Rifle is done. So anyone planning on bringing an elephant or tiger to a site near me had better watch out!

_DSC8332

This break action is very satisfying to carry broken over the arm and practice your swift mountings in the bedroom mirror.

_DSC8333

The buttplate, lightly oil finished. I’m yet to take a picture that does this justice, but that gorgeous selection of colours fading from one to another is very satisfying.

_DSC8337

The straight-wrist stock is a classic English side-by-side design. I’ll probably make other styles of stock in future versions.

_DSC8340

The shells are roughly based on .700 Nitro-Express. These are quite nice for extraction and pocketing, a nice handful in every pair.

_DSC8344

The Express sights deserve comment. Given the nature of express cartridges, heavy and slow, they have a somewhat rainbow trajectory. This style of sight allows the shooter to quickly select their range and fire without having to finely adjust a wheel or tangent.

_DSC8347

At the front, I’ve taken a leaf out of the French book of rifle design, a chunky front post (already there) for fast shooting and a finer notch in the middle for more precise shots, just in case I ever want to make them!

_DSC8348

Broken open, the shells look pretty good! APS cartridges are the heart of this system, though I may make some custom shells in the future.

_DSC8349

Finally, the etching. I felt that this was the sort of detail that really needed doing. At some point, I’d like to come back to this and redo it with more extravagant etchings, some scrollwork or an elephant or something. Maybe when I’ve had a bit more practice…

_DSC8350

 

If you are interested in this project you can see the rest of the project here. If you have an idea of your own, drop us a line on enquiries.vintageairsoft@gmail.com to discuss. ‘Like’ our Facebook page or follow the blog to get regular updates on projects and interesting videos and articles.

 

Don’t forget you can buy our smaller items via Etsy. Our larger items can be found here.